C1D1 and C1D1 Extraction Pods. Difference?

When selecting the C1D1 and C1D2 portable extraction pods, it's crucial to take note of the specifications that would work well with your environment. You must have an understanding of what their differences are, plus the specific situations that warrant their usage. It's well known that the extraction environment can be dangerous for people to stay in, and this is due to the use of some solvents like ethanol, Co2, and butane which are highly volatile. If no preventive measures are put in place, they run the risk of an explosion. Both C1D1 and C1D2 classifications are part of the regulating rules issued by the government to checkmate the hazardous occurrence in the extraction environment.

C1D1 and C1D2 extraction pods. What's the Difference?

Suppose your work area is marked Class 1, Division 1, or Class 1, Division 2. In that case, it's a dangerous space that runs the risk of an explosion or a fire incident due to the emission of harmful substances from the solutions and solvents used for the extraction process.

The National Fire Protection Association classified the differences between C1D1 and C1D2 extraction areas depending on how the gasses in the said area are contained or released.

Class 1, Division 2 location (C1D1)

Under normal circumstances, during extraction, there might be an emission of quantities of volatile gasses or vapor due to wear and tear of some of the working equipment in the lab. In some cases, workers do not notice that one or some of the kits has gone bad, resulting in leakage. Or it can also be a scenario of an erroneous procedure that ignited the flammable gasses or vapor.

Class 1, Division 2 location (C1D1)

An area is classified as a C1D2 extraction location due to the confinement of the gasses. Although volatile solvents and gasses are required for the whole extraction process, they are usually confined in a closed system with adequate mechanical ventilation that protects the environment. In any case, if there is a leakage, it would be due to an accidental discharge or a breakdown in any equipment. Another reason would be if there is a C1D1 location nearby, concentrations of these combustible gasses might infiltrate into the C1D1 environment if there is insufficient ventilation to neutralize the incoming gasses. So, it's essential to ensure the ventilation system is always in place to checkmate such a situation.